Frequency Sweep Entry dialog box
Project Editor - Analysis Setup
The Frequency Sweep Entry dialog box allows you to set up a new sweep entry or edit an existing sweep entry.
This dialog box is opened when you click on the Add button in the Analysis Setup dialog box when Frequency Sweep Combinations are selected. To open the Analysis Setup dialog box, select Analysis => Setup from the project editor main menu.
Sweep Control
This section of the dialog box allows you to select the type of sweep and enter the required values for the sweep. The type of sweep is selected from a pull down list.
Sweep Type: You may chose from Linear sweep, Adaptive Sweep (ABS), Single Frequency, DC Frequency sweep, Exponential sweep, Linear Sweep (# Points), Find Minimum, and Find Maximum. Only the controls associated with each sweep type are enabled in the rest of the dialog box. Click on the links below for more details about each sweep type.
Settings
This section of the dialog box is updated depending on which type of sweep is selected in Sweep control. The various inputs are described above in the discussion of sweep types.
For a detailed discussion of ABS, see
the ''Adapted Band Synthesis'' chapter in the Sonnet User's
Guide.
