Manual Loading

To load the interface manually from the Command Interpreter Window (CIW), do the following:

1. Invoke Cadence.

    The CIW appears on your display.

2. Enter the command below at the prompt in the CIW.

loadi(“< Sonnet Directory>/sonnet_virtuoso_dk/install/sonnet_virtuoso_install.il”)

where <  Sonnet Directory > is the directory in which Sonnet is installed. For example, if you installed the software to “/home/sonnet”, then type:        

loadi(“/home/sonnet/sonnet_virtuoso_dk/install/sonnet_virtuoso_install.il”)

Again, note that you must substitute your pathname in place of “/home/sonnet.”

If you choose to load the interface manually, you must enter this command each time Cadence Design Framework II is invoked.