Run - Specify Batch Time

Analysis Monitor - Run Menu - Batch Timer dialog box

Select Run => Specify Batch Time to set up start and stop times for a batch. This allows you to run your analysis(es) during the night or at another time when you know the processing load is likely to be lighter. It is possible to specify only a start time or only a stop time.

If you wish to specify a start time for jobs specified in this batch window, click on the Automatically start this batch at: checkbox, then use the drop lists to the right to specify at what time you wish the analysis run to start. Be aware that you still need to select the Run => Start command in order for the batch to execute at the specified time. If no start time is specified the analysis job starts immediately when you select Run => Start or click on the Run button on the analysis monitor tool bar.

If you wish to specify a stop time for jobs specified in this batch window, click on the If this batch is not completed, stop it at: checkbox, then use the drop lists to the right to specify at what time you wish the analysis run to stop. If no stop time is specified, the analysis job runs until it is complete or you select Run => Stop.